BREAKING 2wd sapphire, BUY BUY BUY my shonky ford parts!

[Mr.worth]

Ill start with the shell, Ive owned the car for 8 years, its White, loads of history, always garaged, not concourse but not bad, chassis legs have very minimal surface rust, has had a couple of bits sorted out inside footwell and around passenger seat mount, I did start to crack on with underbody resto but then gave up due to other cars! will get pics at the weekend, rear drivers door gone at the bottom, slight dink on n/s wing where a head light fell of the shelf onto it (its not bad though). This will come with all doors glass, boot and bonnet, it wont be rolling, £500 Engine, 200 block built by bluesprint done 10k Balanced bottom end with shot peened rods Proper long stud conversion WRC Headgasket Forged pistons 7:5:1 Ported 2wd head BD10 cam Isky valve springs Vernier pulleys Polished inlet manifold comes with all sensors attached.....£1999 Collection only! Here goes all the other bits bear with me I do expect to be very busy from this lol, all plus postage or collection, started stripping the car today so most bits are avalible and ready for packaging. Saftey Device Rollcage from a 3dr does fit the saff £250 Collection only! SOLD Alloy Incar fuel tank £250 SOLD Air Injectors and wiring harness £200 SOLD Siemens black injectors 83lb ones £180 SOLD Side Exit Exhaust, goes straight to 4" off turbo x2 lamba sensor/gauge ready, upswept tail, very very loud, has been restricted inside for some back pressure £400 Collection only! SOLD L8 ecu with msd closed loop chip for spec im selling £300 SOLD Pace alloy rad £60 SOLD Bosch 044 fuel pump and fitting £100 SOLD Universal Turbos T34/T38 43 housing only 600 miles, -31 and black samco hose for air filter £600 SOLD 17" Ultralite 789's Mint!with Lightweight nuts, will check what tyres are on them I know they're legal if that helps £350 SOLD Ap 6 paddle clutch and Alcon cover (best combo IMO) Less than 1000 miles £250 SOLD Ap racing 4pots,Brackets discs and green stuff pads Hardly used £850 SOLD 2wd Rear calipers, grooved discs, good pads £150 painted black Front and Rear Bumpers, Front has toe eye part cut out VGC £150 for the pair including fogs and surrounds Collection only! RS500 Fibreglass style splitter £80 Collection only! 2wd Beam and driveshafts hubs and polybushed arb £80 Collection only! Standard Headlights £30 Morette twin headlights £200 SOLD Bailey turbo damper £80 SOLD Boot sponge and carpet £25 Sideskirts £40 GearBox Bellhousing £40 SOLD 2wd Fuel pressure reg £25 SOLD 2wd Exhaust manifold £50 2wd dark dash top part £50 New clutch cable £10 SOLD Bailey turbo damper £80 SOLD Spec R rear strut brace £80 Ahmed Uprated Lowering Springs, these are brand new! £130 SOLD Rear Brake disc gaurds, these are new £25 SOLD Smoked rear lights £50 Bailey oil seperator £60 SOLD Pace swirl pot £40 SOLD Pace header tank £80 SOLD 3 bar map sensor £40 SOLD GRP A coil £15 SOLD RS engraved bonnet raisers £20 2wd Steering rack £100 Uprated Diff mount £100 SOLD Carbon fibre battery holder, this is a one off! £15 SOLD Carbon fibre dump valve plug £15 Carbon fibre rear door quarter bits £50 SOLD Motorsport HT Leads and dizzy cap £50 SOLD Ignition amplifier £25 Glebe Straightcut DOGBOX, 50 miles £1999 Gripper diff (not quiafe) New in powdercoated casing with zinc plated bolts standard ratios £999 Rear diff gaurd, powdercoated black £80 New Reconditioned Driveshafts ready to go £120 SOLD GRP A Front hubs New£70 Engine loom £70 SOLD 2wd clocks £25 Bailey PAS tank £65 SOLD Front ARB with poly bushes £30 K&n Air filter £50 SOLD Koni/Bilstein Shocks with Chassis dynamic springs £200 SOLD RS 3 spoke steering wheel push horn and RS boss £180 Alternator £30 Propshaft £50 Bosch 044 fuel pump bracket, brand new still boxed £40 SOLD ISCV £25 SOLD Carbon 3 gauge holder for dash £15 SOLD Oil pressure gauge electrical stepper type, not cheap ebay tat, face had a few marks £35 AutoMeter Air fuel ratio gauge + fitting kit £80 SOLD Ignition amplififer and bracket £25 Mocal oil pressure gauge, electrical type "25 Samco hoses for water X2 £40 SOLD Samco hoses for boost X2 £45 SOLD Sabelt harness, needs a clean £20 Inlet temp gauge, digital type £20 SOLD Magnetic sump plug for Nissan skyline £5 Cosworth grill, one broken clip £15 Starter motor £50 posted Will update with pics asap, Probably missed loads so ask just incase I have what you need My number 07525774987

If you were logged in, you wouldn't be seeing this ad! Register your free account today, or log in if you already have an account.

[J1mbo]

Can I have a pic of front splitter please and would you post ? Can email me the pics at Jim_Gibbs@hotmail.co.uk or pm me on here ! Cheers

Ps pic of header tank would be good too

[Craig J]

Hi, Could you tell me what is unique about the Group A front hubs and driveshafts please? Thanks, Craig

[turbocat]

Martin WHAT ARE YOU DOING

I can back this engine its 100% genuine. Such a shame mate have you gone skyline mad

[panosrc]

Hi can I have a pic of the Gra hubs?

[cossieclive]

im interested in the bonnet lifters, boot carpet and carbon door quarters, but will need to check how much i get on pay day!!

[Jase-G22TMJ]

I've been in this car last time it was on the road....... the motor is A1 and fvck mr does I go!

[Mr.worth]

Pics of requested parts and a few extra , Please note all polished parts will need a polish

[bad boy rs]

Hello mate i will take the rear brake cover things please, can you pm me payment details

[Mr.worth]

Originally Posted by bad boy rs

Hello mate i will take the rear brake cover things please, can you pm me payment details

Hi mate, sorry you were about 30seconds too late

Be quick peoples

[Mr.worth]

Just to add, the Doors have mint window rubbers and the shell is an ex press car used by ford, there's a riveted plate on the slam panel that says no manufactures warranty, Alain no rot inside rear arches and all sound deadening has been removed, all the hard works done underneath ready for resto, inside bootlid is also mint, engines coming out tomorrow so will get pics of good and bad bits on the shell, could really do with it gone as it takes up loads of space!

[J1mbo]

Can I have a picky of splitter please bud ! Jim

[Mr.worth]

Originally Posted by J1mbo

Can I have a picky of splitter please bud ! Jim

Haven't forgot you mate, the cars wedged right up to the workbench and on axle stands, engines coming out tomorrow so I'll try ang get it off

[AJC]

What have the shafts had done to them? 2wd shafts? Also, will you post

[J1mbo]

Originally Posted by Mr.worth

Haven't forgot you mate, the cars wedged right up to the workbench and on axle stands, engines coming out tomorrow so I'll try ang get it off

Thanks matey mucho appreciated

[Mr.worth]

Originally Posted by AJC

What have the shafts had done to them? 2wd shafts? Also, will you post

They have been reconditioned by a place in dorset who traded on ebay,...tg motorsport rings a bell?, dont know if they're still around but they had an immaculate workshop and break rally cars so could be stronger? im sure there was a reason I bought them, anyway they're powdercoated and zinc plated with new boots, for 2wd and ive had them for a couple years now.

cheers

[c20tbo]

Pm'd

[snoopaloopa]

Originally Posted by Mr.worth

They have been reconditioned by a place in dorset who traded on ebay,...tg motorsport rings a bell?, dont know if they're still around but they had an immaculate workshop and break rally cars so could be stronger? im sure there was a reason I bought them, anyway they're powdercoated and zinc plated with new boots, for 2wd and ive had them for a couple years now.

cheers

Aslo known as TG_91 iirc

[Mr.worth]

Originally Posted by snoopaloopa

Aslo known as TG_91 iirc

That's the boys!!, they built the diff, and I got the hubs off them too, I was like a kid in a candy shop I their container.

[saph in dorset]

would be interested in the uprater diff mount if you still have it??

let me know what the postage would be as well to Poole, BH16 5JJ

thanks adam

[jay991]

just tryed to give you a ring if you were wonering about the stange number, have you got a good set of dark door cards by chance?

[Rob Virgo]

any secs monitor lad

rob

[Mr.worth]

Originally Posted by jay991

just tryed to give you a ring if you were wonering about the stange number, have you got a good set of dark door cards by chance?

Sorry mate no door cards

Rob,

No secs im afraid.

cheers

[AJC]

Will you post those shafts then matey? Ta

[Rob Virgo]

Originally Posted by Mr.worth

Sorry mate no door cards

Rob,

No secs im afraid.

cheers

thks but you should get a girlfriend maybe.......lol












































































couldnt resist

[Mr.worth]

AJC, sorry mate they've sold,

I can send anything anywhere, im spreading the car all over the world as we speak

Rob,

Stop trying to offer me money for secs mate

[Mr.worth]

Todays Treasure,

[Mr.worth]

Someone buy my shell before I cut it into little peices

[turbocat]

Stick it on ebay Mart If I get 5 mins tomoz I will pop up

[1300gt]

Interested in sytec pump mounting. Pm me best del price please

[1300gt]

Paypal coming your way mate. I will take the black pump mount .

Cheers

[J1mbo]

Have you had any chance to take picky of splitter yet bud ?

[Mr.worth]

Originally Posted by J1mbo

Have you had any chance to take picky of splitter yet bud ?

Its still on the car im afraid, thinking about it im not to sure I want to post it, its only fibreglass and couriers dont give a shit

As soon as its off I'll get a pic, havent got round to getting the engine out yet as nobodys intrested in it or the shell so they can stay where they are for now,so front bumper and splitter are stuck about a mm away from the workbench

[cossie891]

Mate I need front door panel screws and all the screws/bolts in the bay also a drivers window motor

[mulla]

recived springs today was very happy thanks again

[J1mbo]

No probs mate !

[lewis spooner]

might seem a bit stupid but badges ??

[ram]

Doh! the 6paddle was still for sale yesterday. why did i wait lol. pm'd regarding black boost hoses

[Mr.worth]

Originally Posted by lewis spooner

might seem a bit stupid but badges ??

Badges are going with boot and shell at the moment, if the shell doesn't go then boot and doors ect will be sold seprate

[lewis spooner]

Originally Posted by Mr.worth

Badges are going with boot and shell at the moment, if the shell doesn't go then boot and doors ect will be sold seprate

ok mate