Ford RS Cosworth Parts for Sale Only RS Cosworth parts here please. Only Gold Members can sell parts!

**Escos project breaking, plus many other spares!** updated 8th june

Thread Tools
 
Search this Thread
 
Old 21-01-2010, 04:48 PM
  #1  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default **Escos project breaking, plus many other spares!** updated 8th june

my project thread:
https://passionford.com/forum/restor...rth-build.html

All prices here are NOT including postage.

Shell is still for sale, £3250 rolling, never been registered. comes with WRC bodykit including carbon kevlar wings/bumper and some custom made stubby WRC style mirrors. it has an rs2000 interior at the moment, with cossiie banana dash and centre consoles. comes with some carpets, plastics and a roof lining. wiring and fusebox are in place, but it has no engine loom.

Alloy Sideskirt Clips for sapphire cosworth, set of 16. anodised in black, with stainless fixing screws. these were going to be a group buy, but CDF started manufacturing them before these were completed. Only have 2 sets, only after £62 a set to make my money back on them. You can check old posts if you don't believe me

WRC Escort intercooler from pace. dosen't look to have seen much use. £150

4x4 box with stripped 3rd gear - £30

XR4x4 v6 box (missing front housing) good gearset though. £40

2wd inlet manifold (no plenum) £10

4x4 engine arms, new. £5 the pair

cosworth front main seal housing - £10

4x4 starter motor - £25

power steering bracket/mount - £5

oil pump hex drive shaft - £3

oil pump/dizzy drive shaft (the one that goes in the front of the block with a pulley on it) - £5

throttle cable bracket (on inlet manifold) - £3

2wd thermostat elbow - £5

2wd clutch cover, used. - £10

wiper arm, new! think it may be a rear escos one. part number 6122486. - £5

cossie rad fans, both work very well! £30

escos 3" exhaust system (downpipe back), used. usual scrape down the centre box and has had a bracket repaired think it's mongoose but not sure. £150 (will not post)

AVO front coilovers for 4x4 cossie, complete with springs. need a refurb £90

L6 ecu and 2wd engine loom, no chip in ecu, but came out of my own sapphire, so i know its in working order. £110

Escos rear prop £80. will not post.

Kent BD14 inlet/exhaust cam, still in box. £100

scrap cossie head, no caps/guides/valves. useful for a dummy engine. £25

pair of upgraded engine mounts for 4wd (alloy with rubber bushes), no idea of make. £60

brand new rear ARB links for cossie (genuine ford, with labels still). £20

2wd Fuel rail and pressure regulator - £20

4wd sump with shaft, needs a good clean! - £40

Pro-Alloy breather (for sapphire, but should fit escos i think?) £50

Plenum Spacer - £40

Escos fuel filler neck - £30

Pics - please excuse the poor quality!











thats it for now, will add more as i find it! as above, prices don't include postage.

Last edited by Turbo Zetec; 08-06-2010 at 04:53 PM. Reason: updates
Old 21-01-2010, 10:04 PM
  #2  
Marcus B
Wahay!! I've lost my Virginity!!
iTrader: (1)
 
Marcus B's Avatar
 
Join Date: Jun 2009
Location: derbyshire
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default

i will have the exhaust
Old 22-01-2010, 11:22 PM
  #3  
tezmanian devil
I've found that life I needed.. It's HERE!!
iTrader: (8)
 
tezmanian devil's Avatar
 
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes on 0 Posts
Default

are you completly mad? i jus had a gander through your resto thread, and i think your nut's to be selling this
Old 23-01-2010, 09:40 AM
  #4  
Marcus B
Wahay!! I've lost my Virginity!!
iTrader: (1)
 
Marcus B's Avatar
 
Join Date: Jun 2009
Location: derbyshire
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default

pm sent on the brakes
Old 23-01-2010, 01:23 PM
  #5  
Big Will_
Borg Warner EFR Equipped!
 
Big Will_'s Avatar
 
Join Date: Apr 2005
Location: In the unit, building a 450bhp Time Attack Focus!
Posts: 5,810
Likes: 0
Received 2 Likes on 2 Posts
Default

I'll have my oil pump back please

(Seriously!)
Old 23-01-2010, 02:27 PM
  #6  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default

Originally Posted by tezmanian devil
are you completly mad? i jus had a gander through your resto thread, and i think your nut's to be selling this
lol thanks , not mad unfortinately, just need to get myself out of debt so i can start over! i'll have another though, we're probably going to save for a jewel violet monte eventually.

mark - i've responded on ebay

will - not a problem! its still in the packaging you sent it to me in!

going to sort my shed out tomorrow, so i'll see whats there and get pics
Old 23-01-2010, 04:04 PM
  #7  
Marcus B
Wahay!! I've lost my Virginity!!
iTrader: (1)
 
Marcus B's Avatar
 
Join Date: Jun 2009
Location: derbyshire
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default

PM sent
Old 23-01-2010, 05:05 PM
  #8  
-beefy-
formerly beefy-rst-2
iTrader: (6)
 
-beefy-'s Avatar
 
Join Date: Sep 2005
Location: cleveland rsoc
Posts: 10,072
Likes: 0
Received 3 Likes on 3 Posts
Default

any more info on the alcons mate ,

never seen the 3 pot design before,

how much stopping power they got to say a 4 pot /6 pot design ?


beef
Old 24-01-2010, 04:01 PM
  #9  
GML
Virgin
 
GML's Avatar
 
Join Date: Jan 2010
Location: France
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

PM sent on ebay for fuel neck
Old 24-01-2010, 06:42 PM
  #10  
lewismk1
Regular Contributor
 
lewismk1's Avatar
 
Join Date: Dec 2006
Location: Blackpool
Posts: 342
Likes: 0
Received 0 Likes on 0 Posts
Default

Second on the oil pump if Will decides he doesnt want it.
Old 24-01-2010, 07:34 PM
  #11  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default

Originally Posted by -beefy-
any more info on the alcons mate ,

never seen the 3 pot design before,

how much stopping power they got to say a 4 pot /6 pot design ?


beef
no info other than they were destined for jwrc fiesta's and they came from m-sport. thats about all i know i'm afraid! sorry

GML - got your message, the shell is a late one, but i'm not sure about the filler neck as it came in a box of bits . i'll try to get some pics up for you to see if you can identify it as early or late.

Lewismk1 - no probs, i'll let you know
Old 24-01-2010, 08:36 PM
  #12  
tezmanian devil
I've found that life I needed.. It's HERE!!
iTrader: (8)
 
tezmanian devil's Avatar
 
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by MD Cos
lol thanks , not mad unfortinately, just need to get myself out of debt so i can start over! i'll have another though, we're probably going to save for a jewel violet monte eventually.
ah i see, fair play, hard times and all that
good luck with your sales anyway, what you doin with the wrc spoiler?
Old 01-02-2010, 05:53 PM
  #13  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default

few more bits added and descriptions changed!
Old 01-02-2010, 07:34 PM
  #14  
Bloomers
Cornish Fasty
iTrader: (1)
 
Bloomers's Avatar
 
Join Date: Jul 2008
Location: Bristol
Posts: 1,097
Likes: 0
Received 0 Likes on 0 Posts
Default

pics of the intercooler?
Old 01-02-2010, 07:52 PM
  #15  
RS500/364
BANNED
BANNED
 
RS500/364's Avatar
 
Join Date: Jul 2003
Location: Surrey BUT IF UR A FIT WOMEN
Posts: 4,185
Likes: 0
Received 0 Likes on 0 Posts
Default

Nice shell but a proper escos can be got with the id for less
needs to be registered at least or £1k-£1.5 max
Old 02-02-2010, 05:42 PM
  #16  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default

Originally Posted by RS500/364
Nice shell but a proper escos can be got with the id for less
needs to be registered at least or £1k-£1.5 max
i'd rather keep it than sell it that cheap as it has no rust, never been on the road or rallied. £1.5k hardly covers the bodywork thats been done . it's ideal for someone thats totalled their escos road car as it's not caged and never has been .

if it dosent sell though, i'll strip it down to a bare shell and sell it in pieces .
Old 02-02-2010, 05:52 PM
  #17  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default

Originally Posted by Bloomers
pics of the intercooler?
see my resto thread link at the top of this page - pics of the intercooler on page 2 and 3
Old 03-02-2010, 04:04 PM
  #18  
Smit
The 60ft Launch King
iTrader: (5)
 
Smit's Avatar
 
Join Date: May 2003
Location: Ipswich, Suffolk
Posts: 23,682
Received 9 Likes on 8 Posts
Default

Marty what are you doing!!!!!!!!!!!!!!!!!!

Is it Keeleys Fault?
Old 03-02-2010, 11:48 PM
  #19  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default

Originally Posted by Smit
Marty what are you doing!!!!!!!!!!!!!!!!!!

Is it Keeleys Fault?
lol mark, not her fault at all! just need to get ourselves sorted money wise if we plan to go anywhere with our lives

this won't be the end of me and cossies though, i'll just save for one rather than running up loans and cards! another sapphire is on the cards eventually - or we might save up for a jewel violet monte!
Old 04-02-2010, 12:08 AM
  #20  
powers
15000
 
powers's Avatar
 
Join Date: Jul 2007
Location: Abergavenny. S. Wales
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Default

Do the alcons come with the sliders? If yes I will take a pair.
Old 04-02-2010, 03:24 PM
  #21  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default

Originally Posted by powers
Do the alcons come with the sliders? If yes I will take a pair.
unfortunately not however if you take a look on my resto thread, there is a picture that M-Sport sent me. they may well be able to supply the mounts.
Old 04-02-2010, 03:25 PM
  #22  
Smit
The 60ft Launch King
iTrader: (5)
 
Smit's Avatar
 
Join Date: May 2003
Location: Ipswich, Suffolk
Posts: 23,682
Received 9 Likes on 8 Posts
Default

Good to Hear Marts...
Old 09-02-2010, 06:15 PM
  #23  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default

upski! more added
Old 12-02-2010, 03:58 PM
  #24  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default

some pics added!
Old 12-02-2010, 05:33 PM
  #25  
JohnP001
PassionFord Regular
 
JohnP001's Avatar
 
Join Date: May 2004
Location: West Sussex
Posts: 489
Likes: 0
Received 0 Likes on 0 Posts
Default

have you got one of these? Is so how much?

Thanks
John
Old 23-02-2010, 06:55 PM
  #26  
tezmanian devil
I've found that life I needed.. It's HERE!!
iTrader: (8)
 
tezmanian devil's Avatar
 
Join Date: Dec 2006
Location: eastbourne
Posts: 1,350
Likes: 0
Received 0 Likes on 0 Posts
Default

would you sell the wrc spoiler atall? can collect asap if price is right, unless you could post? also, dont supose you have a wrc grill do ya?
Old 24-02-2010, 08:23 PM
  #27  
3dormatt
Regular Contributor
 
3dormatt's Avatar
 
Join Date: Jan 2005
Location: southampton
Posts: 236
Likes: 0
Received 0 Likes on 0 Posts
Default

Have you got any front door cards please, I'm desperate!
Old 28-02-2010, 09:04 AM
  #28  
XR_Cos
I'm Finding My Feet Here Now
 
XR_Cos's Avatar
 
Join Date: Jul 2007
Location: Suffolk
Posts: 130
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm pretty sure he doesn't have any escos door cards, it's fitted with rs2k interior. Don't think the spoiler will get sold seperate. I'll tell him to check his thread!
Old 04-03-2010, 06:56 PM
  #29  
neo
Too many posts.. I need a life!!
iTrader: (2)
 
neo's Avatar
 
Join Date: Jul 2003
Location: Durham uk
Posts: 610
Likes: 0
Received 0 Likes on 0 Posts
Default

Hi have you got any up to date good pictures of the shell interior and engine bay and floors etc..

Does the shell have any id ?

What is the bottom line price wise for the shell ??

thanks Rob

barnsey1971@aol.com for some pictures if you have some, ive seen the build thread from 3 years ago...
Old 05-03-2010, 05:13 PM
  #30  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default

i'm back! been very busy over the last couple of weeks, not had time to get on here!

i've replied to PM's, now for the thread!

johnp001 - really don't think i have one, but i'll check
tez - replied to pm
3dormatt - i've got rs2k doorcards i think, but no escos ones
neo - replied to pm

cheers all
Old 07-03-2010, 11:23 PM
  #31  
airbrushfx
PassionFord Regular
 
airbrushfx's Avatar
 
Join Date: Jan 2008
Location: brighton
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default

i'd be interested in the banana pod and gauge if avaliable?
cheers Chris
Old 16-03-2010, 06:29 PM
  #32  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default

afraid i'm not breaking the car up yet, what's fitted to it is going with it. here's some recent pics of the car, it really needs a good clean and polish, but these will have to do for now. there is some slight surface rust around the battery tray at the moment from the swarf that came from drilling the wings off, it should clean off no problem though. i had a closer look at the IC too, plus i got a few pics of it









Old 19-04-2010, 05:56 PM
  #33  
Turbo Zetec
Engine Machinist
Thread Starter
iTrader: (1)
 
Turbo Zetec's Avatar
 
Join Date: Jul 2004
Location: Suffolk/Cambs
Posts: 3,012
Likes: 0
Received 32 Likes on 31 Posts
Default

updated today
Old 23-04-2010, 12:30 PM
  #34  
xr_craig
PassionFord Post Whore!!
iTrader: (2)
 
xr_craig's Avatar
 
Join Date: Oct 2003
Location: East Yorkshire
Posts: 4,029
Received 46 Likes on 36 Posts
Default

I'll have the rear arb links please mate. Pm me payment details please
Old 23-04-2010, 01:06 PM
  #35  
Crazyass
230km/h+ in an oil burner
 
Crazyass's Avatar
 
Join Date: Dec 2006
Location: Portugal
Posts: 145
Likes: 0
Received 2 Likes on 2 Posts
Default parts

hi mate.
could you do me a favour and confirm me the size of the IC?
core, total and inlet/outlet diameter.

cheers

Ricardo
Old 23-04-2010, 05:57 PM
  #36  
M K
10K+ Poster!!
iTrader: (9)
 
M K's Avatar
 
Join Date: May 2004
Location: Essex
Posts: 10,864
Received 60 Likes on 59 Posts
Default

im in no rush but if your ever venturing down essex way (wickford ss129eq) i will take the scrap head for a dummy build
Old 23-04-2010, 06:57 PM
  #37  
-beefy-
formerly beefy-rst-2
iTrader: (6)
 
-beefy-'s Avatar
 
Join Date: Sep 2005
Location: cleveland rsoc
Posts: 10,072
Likes: 0
Received 3 Likes on 3 Posts
Default

md you willing to bend on the comp mo ?

may be intrested as it would be ideal to mock up my brake kit n that ,


drop me a pm if you dont mind fella
Old 15-05-2010, 12:52 AM
  #38  
Moonshine
Wahay!! I've lost my Virginity!!
 
Moonshine's Avatar
 
Join Date: Mar 2008
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default

no chance you'd sell me the steering wheel is there? I could give you a replacement in exchange for free, so you could still steer - I'm just after an original jobbie.

cheers
Old 16-05-2010, 05:20 AM
  #39  
fezzajsy
10K+ Poster!!
iTrader: (9)
 
fezzajsy's Avatar
 
Join Date: Nov 2004
Location: jeRSey..isles
Posts: 13,596
Received 33 Likes on 33 Posts
Default

do u still have the sideskirt clips mate?
Old 17-05-2010, 06:43 AM
  #40  
JamesH
10K+ Poster!!
iTrader: (21)
 
JamesH's Avatar
 
Join Date: Jul 2003
Location: .
Posts: 10,807
Received 8 Likes on 8 Posts
Default

What size is the plenum spacer?


Quick Reply: **Escos project breaking, plus many other spares!** updated 8th june



All times are GMT. The time now is 01:27 AM.