XR2i with 1.6 ZT breaking
#1
PassionFord Post Troll
Thread Starter
Join Date: Jan 2006
Location: You will never know. Now fook off
Posts: 3,089
Likes: 0
Received 2 Likes
on
2 Posts
XR2i with 1.6 ZT breaking
My mate is breaking his 2i. It has a 1.6 ZT i know. Running on KMS management. Full kit. T3 turbo is sold. the exhaust mani is made to fit a T3 on it.
Car running
http://s152.photobucket.com/albums/s...t=MOV04637.flv
So heres the list.
Rover turbo inlet £50
Adaptor plate from head to inlet. £40
315cc injectors 16ohm£40
Escos fuel pump allmost new.£50
Wiechers front strutbrace£50
Wiechers rear strutbrace£40
Readhp 280mm steering wheel. Allmost new. Incl hub£70
10row(spelling?) oil cooler. 230mm long £80
Exhaust mani is SOLD
Might have more just send me a PM
pics
Car running
http://s152.photobucket.com/albums/s...t=MOV04637.flv
So heres the list.
Rover turbo inlet £50
Adaptor plate from head to inlet. £40
315cc injectors 16ohm£40
Escos fuel pump allmost new.£50
Wiechers front strutbrace£50
Wiechers rear strutbrace£40
Readhp 280mm steering wheel. Allmost new. Incl hub£70
10row(spelling?) oil cooler. 230mm long £80
Exhaust mani is SOLD
Might have more just send me a PM
pics
Last edited by Mr.T; 04-01-2009 at 04:41 PM.
#4
YES I KNOW I CANT SPELL
Join Date: Mar 2008
Location: chingford e4
Posts: 5,271
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
PassionFord Post Troll
Thread Starter
Join Date: Jan 2006
Location: You will never know. Now fook off
Posts: 3,089
Likes: 0
Received 2 Likes
on
2 Posts
KMS management spec list
KMS Management ECU MP25(M)/MA25(M)
- Complete engine management system up to 10 cylinders
- Lambda-control self-learning with standard or wideband sensors
- Boost control (gear independent)
- Launch control / Pitlane limiter (variable)
- Idle control
- Powershift (separate delay and cut-off time for each gear)
- A.L.S. (variable)
- Engine diagnostics
- 3 auxiliary outputs ( Shiftlight, water-injection, cooling fan, etc.)
- RPM limiter
- 2 engine load sensors
- Analogue input ( 2nd lambda, gearbox position, G-force sensor, EGT, etc.)
KMS UEGO Display set
KMS UEGO Display Controller is not only to be used as an controller for the KMS management system but also to be used as an display for Lambda value.
- Lambda range 0.65-1.35 or AF ratio 9.5-19.8
- Analoge output for management system
- Serial and CAN com port for displaying boostpressure,
air intake temp. etc.
- Graphic display 128x64
- Sample rate 2000/sec.
- Included Bosch LSU4.9 wideband lambda sensor
KMS Management ECU MP25(M)/MA25(M)
- Complete engine management system up to 10 cylinders
- Lambda-control self-learning with standard or wideband sensors
- Boost control (gear independent)
- Launch control / Pitlane limiter (variable)
- Idle control
- Powershift (separate delay and cut-off time for each gear)
- A.L.S. (variable)
- Engine diagnostics
- 3 auxiliary outputs ( Shiftlight, water-injection, cooling fan, etc.)
- RPM limiter
- 2 engine load sensors
- Analogue input ( 2nd lambda, gearbox position, G-force sensor, EGT, etc.)
KMS UEGO Display set
KMS UEGO Display Controller is not only to be used as an controller for the KMS management system but also to be used as an display for Lambda value.
- Lambda range 0.65-1.35 or AF ratio 9.5-19.8
- Analoge output for management system
- Serial and CAN com port for displaying boostpressure,
air intake temp. etc.
- Graphic display 128x64
- Sample rate 2000/sec.
- Included Bosch LSU4.9 wideband lambda sensor
Thread
Thread Starter
Forum
Replies
Last Post
chowfornow
Ford Non RS / XR / ST parts for sale.
14
05-01-2019 09:01 PM
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM