FOCUS_DRIVER2001

Hi People..... Marry Xmas..

How can I sort this out I have used 3 kinds of the best glues with no luck or it sticking down. The rubber bit as gone so in will not slot back in.

Thanks

costina

iTrader: (1)

Best option is to replace. But something like upol tiger seal will bond it to the panel but you will need something like gaffer tape to hold it into position while it sets.

FOCUS_DRIVER2001

Where can I get a new part from... I have used tape to help with no luck.. I thought tiger seal turns into rubber I may be wrong.

focusv8

That's wrecked.
You'll never get it to stick flat, well you could if it was irreplaceable but would take time and care.

New one for Ford maybe or a breakers.

Or ebay, but it'll probably be cheaper to buy a door and remove the seal;

Similar to this?

http://www.ebay.co.uk/itm/Ford-Focus...wAAOSwYIxX-N12

FOCUS_DRIVER2001

So can it not be fixed or replace.

focusv8

Fixed, NO

Replaced , YES

FOCUS_DRIVER2001

So how and where can I get a replacement.. What is the part called.. Thx

Caddyshack

I would use tiger seal, warm the part first and key the surface then tape it in place and consider something like bamboo against a garage wall to hold it in place for 48 hrs to dry.

STeve

iTrader: (11)

bin it as its rotten, just buy new outer door glass weatherstrip, I have them but dont post as they bend like fook