Help needed locked keys I the boot if my mk1 focus!
#1
Fleet Manager
Thread Starter
Help needed locked keys I the boot if my mk1 focus!
I've locked my only set if keys in the boot the cars also dead locked!!!
I've bent the top of the door out tryed the boot release and the handle it self neither work
Anyone got any suggestions?
I've bent the top of the door out tryed the boot release and the handle it self neither work
Anyone got any suggestions?
#5
Ban[B][/B]ned
Join Date: Jul 2005
Location: The Pool.
Posts: 34,090
Likes: 0
Received 0 Likes
on
0 Posts
Any Mk1 Focus key will open your car providing they know how to do it properly. So you need someone with another mk1 Focus and someone who knows how to do it. And before people reply telling me they only lock it, no, they also open it if you know how. I am not sure how to it sorry but it does just involve sticking the key in and turning it some strange way.
Benni
Benni
Last edited by Benni; 12-11-2013 at 06:37 PM.
#6
Fleet Manager
Thread Starter
Like I say I've pulled the door apart far enough so I Cooild get a rid to the door and the boot release button but it's dead locked so door won't open and the boot release didn't work
Benni would you care to shear the info in what to do via PM?
Benni would you care to shear the info in what to do via PM?
Trending Topics
#8
I've found that life I needed.. It's HERE!!
if you knacker the driver's door and/or window and it's a 3 door focus, i've got a door and a window you can have FOC if you want
The following users liked this post:
telishia (01-03-2015)
#15
Ford allegiance
#16
Ford allegiance
#17
As underdog said, I did this years ago in 2002 Mondeo. The RAC did this, they went in to the gap between the body and the tailgate, they pulled the rubber cover that the wires run through out of the body then probed the wires with a live feed. If I remember rightly there were two orange wires and it was one of those.
#18
Fleet Manager
Thread Starter
#19
Fleet Manager
Thread Starter
#20
Fleet Manager
Thread Starter
As underdog said, I did this years ago in 2002 Mondeo. The RAC did this, they went in to the gap between the body and the tailgate, they pulled the rubber cover that the wires run through out of the body then probed the wires with a live feed. If I remember rightly there were two orange wires and it was one of those.
#29
Fleet Manager
Thread Starter
#30
you cant fix stupid
#32
Ban[B][/B]ned
Join Date: Jul 2005
Location: The Pool.
Posts: 34,090
Likes: 0
Received 0 Likes
on
0 Posts
Benni
#33
Enthusiastic Novice
Did you manage to get in? I managed to lock my only key in the boot while my focus was dead locked. I was impressed by how secure the car was. I got the RAC out and his method was remove reverse sensor and backfeed 12v which powers up the electric windows. Wedge/Airbag in drivers door, stick to wind window down. Unfortunately I have a saloon so the seat release for back seats is in the boot not accessible from back of car. He then fed 12v to the boot release wire which was under the back n/s seat.
Popping the middle brake light out seems easiest way to go. Or find a friend in the RAC with cover on any car to say they were driving and have locked keys in there (worked for me).
Popping the middle brake light out seems easiest way to go. Or find a friend in the RAC with cover on any car to say they were driving and have locked keys in there (worked for me).
#36
Enthusiastic Novice
Sorry about that. Happened just as I was going on holiday, forgot to post back.
Got the RAC out via a family member. They used a wedge and air bag on the drivers door. Removed reverse sensor from gearbox and fed 12v in which powered up electric windows. Pressed switch with stick. Climbed in drivers window. Wiring loom to boot was accessed from under rear seat and 12v to the boot release.
Removing center brake light would be easier but, this way less risk of damage.
Got the RAC out via a family member. They used a wedge and air bag on the drivers door. Removed reverse sensor from gearbox and fed 12v in which powered up electric windows. Pressed switch with stick. Climbed in drivers window. Wiring loom to boot was accessed from under rear seat and 12v to the boot release.
Removing center brake light would be easier but, this way less risk of damage.
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM