Swirl Pot Setup on FRS
#6
PassionFord Post Troll
its going to be hard to use AN fittings onto o.e. pump as there on speed clips standard. as for lift pump we are just using a walbro foucus pump.. as the 044 does the hard work...
#7
Regular Contributor
Thread Starter
What I meant with the AN fittings with the standard tank was can they be bonded into the OEM cover or does something else have to be made internally to pick up the fuel?
Love your car by the way!
Love your car by the way!
Trending Topics
#8
PassionFord Post Troll
not with you there mate? the flow comes up from the bottom of the tank into the pump, then out the top hat that you can see in the pics, its all 1 unit..
#10
Regular Contributor
Thread Starter
Ok, I see what you are saying. I am going to take a look at it again tonight. Thanks for your help!
(there were two FRS's in Fast ford recently one had orange compomotive wheels and the other was Dhyllan's car which are running setups close to the one I want to put in.)
(there were two FRS's in Fast ford recently one had orange compomotive wheels and the other was Dhyllan's car which are running setups close to the one I want to put in.)
Last edited by thielt1; 26-07-2012 at 05:41 PM.
#11
Too many posts.. I need a life!!
Join Date: Mar 2006
Location: UK
Posts: 955
Likes: 0
Received 0 Likes
on
0 Posts
The Mk1 with the orange MO6's was SteveB's - he's on here :thumbsup:
https://passionford.com/forum/members/66-steveb.html
https://passionford.com/forum/members/66-steveb.html
Thread
Thread Starter
Forum
Replies
Last Post
SMILER258
Restorations, Rebuilds & Projects.
36
28-09-2015 09:04 AM