st170dan

does anyone know if replacing both the upper and lower part of the heat shield cures the rattling problem? ive read about using cable ties and that reduced the problem but didnt eliminate it. ive subsequently removed the lower part as it was looking a bit knackered. both heat shields and bolts are £70 from ford :/ would like to know if it actually works before i splash the cash.

CoupeUK

With my ST170 I had the same problem, stainless cable ties cured it for a short while but then it came back again so I pulled them off. No problems with no heatshields in 40k

st170dan

yeah i know its ok without but im becoming increasingly more ocd with my car and would prefer it to be as its meant to be.

Sp3no

iTrader: (1)

I ripped mine off once it started to rattle another cause is if the Cat bracket has snapped off the cat, this can cause a similar noise.

st170dan

ok cool, il have a poke around next time im under there.

fordsrus

I am having the same problem. Thought it was coming from the exhaust manifold shield because that is very loose. Sorted that out and it is still really bad. Is it the heat shield above the cat that normally causes this rattle then?

H3lsing

I was only looking for a cure for this yesterday. Anyway I found this link.
Problem:

Cure:

st170dan

yeah i did this /\ but it didnt work fully.

st170dan

im just wondering if i remove the top part of the heat shield if i could wrap the cat in heat wrap?