Mart_ZS

Hi guys, new to all this but I joined bcuz I can't think of anyone better to ask than other fiesta/ford owners!! I have done the exterior an interior to a standard I am pleased with just want some more thoughts really especially engine/performance wise!! Cheers Mart!!

denis

fit a puma engine

rsmark86

iTrader: (3)

as above

otherwise full exhaust system and throttle bodies and cams

Mart_ZS

Thanks for response... Don't really wanna go all the way an rip the engine out, an can you suggest any throttle bodies an cams?

m4tt274

iTrader: (2)

is it a mk5 or other?

denis

it can only be a mk5 or mk6

denis

its a days work, i just happen to have everything you need aswell, engine/box/looms etc

Mart_ZS

Its a mk6 2008

denis

maybe you should of stated that in your first post

Mart_ZS

I didn't realise it was a massive issue! I was only asking for some rough ideas!

m4tt274

iTrader: (2)

*the other.

In that case, i would just put a 4/2/1 and miltek and enjoy it.

Straight_4_N/a

st engine conversion.

zetec-Sam

iTrader: (2)

Depends on your budget, cheapest way to gain 25bhp is fit a 1.7 Puma lump. If you want to keep the 1.6, full exhaust, set of Shawspeed SS4 cams, remap and if you want to be safe, some HD bottom end bolts, should see around 150bhp on a healthy engine.
Jenvey ITB's cost big bucks, and you'll have to run aftermarket management (OMEX 600 is the popular choice) but you won't gain a massive amount of power for the money. Lovely noise though!

Mart_ZS

Thanks boys, looks like I have got some spending to do!! I would upload some pics but if I'm honest I don't know how too haha

denis

it does, if it was a mk5, easy option is a puma engine, mk6 easiest option is manifold, exhaust, cams

zetec-Sam

iTrader: (2)

Ignore my post then, if you want to run decent cams in a mk6 then you have to run standalone management, as the idle cannot be mapped on the standard ECU.

Mart_ZS

I really wanna do cams next after talking to you boys, but i have only just had it remapped gutted!! But if it needs to be taken of it will have to come off haha

zetec-Sam

iTrader: (2)

Hang on, is it a petrol or a Diesel? If a Diesel, ignore everything everyone's said, if it's a petrol then why the hell have you had it mapped without cams?!

Mart_ZS

i had it done bcuz i was doing alot of motorway miles so needed better fuel haha

CrOwSoN15

So it's a diesel? Should of stated that originally..

zetec-Sam

iTrader: (2)

'What mods can I do but I won't say the year or the engine.'

Ignore everything in this thread if it's a Diesel, and in future add vital information into the original post...

Mart_ZS

okay maybe i should of stated but like i said i was only looking for ideas an also like i said i am new to all this.... no its a petrol thats i just explained why i had it re-mapped when he asked me @if its petrol why have in remapped without cams'

so..... i have a 2008 mk6 fiesta zetec s, petrol, 50,000, frozen white, pipercross viper induction kit, remapped, custom white an black leather interior, it has rs grills in bonnet, st side skirts black roof, borbet A rep wheels, coilovers, its has a pioneer 7" monitor (AVH X5500BT), 2x10" JBL subs in matching white leather box, 2x 6x9's parcel shelf also wrapped in white leather......

cant think of anything else of the top of my head but i hope this is enough

zetec-Sam

iTrader: (2)

The remap was a pointless waste of money then! A mk6 petrol, best engine mods will be a full exhuast/filter, you could run mild piper cams on a standard ecu, but it will need mapping. If you want to run decent cams, like Shawspeed SS4's, you'll need an aftermarket ecu like an Omex 600, so budget a grand just for the ecu and map...

Duratec conversion is a good route too, quite expensive still as the blocks demand good money, but, your best option is to buy a faster car.

Your sarcastic tone is a little dickheaded considering all we're trying to do is answer your question!

denis

remove all this crap, that will help

Mart_ZS

All your help has been appriciated an next time i will remember to add the right info, cams ordered thanks again boys