Fiesta mk6 seat tilting mechanism broken
#1
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Jul 2003
Location: Central Scotland
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
Fiesta mk6 seat tilting mechanism broken
Anyone had any probs with above?
Seems both sides have gone now on the other halfs fiesta, meaning no access to back seats. seems cable has came away from handles on top of seat.
How do you get access to change cable or handles???
Holty
Seems both sides have gone now on the other halfs fiesta, meaning no access to back seats. seems cable has came away from handles on top of seat.
How do you get access to change cable or handles???
Holty
#2
Focus St mk2 310 bhp :D
Join Date: May 2006
Location: Bolton/Kirkham
Posts: 2,438
Likes: 0
Received 0 Likes
on
0 Posts
Very very common fault mate - ask slowpoke
You can get to it from the bottom if you pull the side plastic section off, from the top can you not prise it off with a screwdriver?
I get mine done at ford cos a mate works there and it's guaranteed then!! - that would be my course of action
You can get to it from the bottom if you pull the side plastic section off, from the top can you not prise it off with a screwdriver?
I get mine done at ford cos a mate works there and it's guaranteed then!! - that would be my course of action
#6
Virgin
Join Date: Sep 2010
Location: greenock, scotland
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I just did one of mine the other week. The new cable has to go down from the top(i took the seat out to do it), DONT buy a Haynes manual just to help you do this,theres nothing in it
Its easy enough in hindsight but I broke one side of the clip that holds the handle in the seat.
If we learn from mistakes, I should be a bloody expert by now
Its easy enough in hindsight but I broke one side of the clip that holds the handle in the seat.
If we learn from mistakes, I should be a bloody expert by now
#7
I just did one of mine the other week. The new cable has to go down from the top(i took the seat out to do it), DONT buy a Haynes manual just to help you do this,theres nothing in it
Its easy enough in hindsight but I broke one side of the clip that holds the handle in the seat.
If we learn from mistakes, I should be a bloody expert by now
Its easy enough in hindsight but I broke one side of the clip that holds the handle in the seat.
If we learn from mistakes, I should be a bloody expert by now
Trending Topics
#8
Hey folks
I've been stuck with two broken seat tilt handles for over a year now and have finally decided to get round to fixing it.
Passenger seat handle is off and now just need to put the new one on. Is there a certain way to do it or does the handle just clip on and hook the nipple/wire tip as it is pushed on? Was a nightmare to take the broken one off.
One of the wires on the driver's seat tilt handle has snapped. Nightmare!
I would load pictures but I do not know how to do it by selecting it's URL
I've been stuck with two broken seat tilt handles for over a year now and have finally decided to get round to fixing it.
Passenger seat handle is off and now just need to put the new one on. Is there a certain way to do it or does the handle just clip on and hook the nipple/wire tip as it is pushed on? Was a nightmare to take the broken one off.
One of the wires on the driver's seat tilt handle has snapped. Nightmare!
I would load pictures but I do not know how to do it by selecting it's URL
Thread
Thread Starter
Forum
Replies
Last Post