Mondeo ST220 Brake Calipers (with discs/pads)

MGTurbo · 20-07-2011, 09:36 PM

I have freshly removed from my 2003 Mondeo ST220, a pair of very good condition calipers painted blue, with Motorcraft pads and discs less than a few months old, done a few 1000 miles, pads are barely worn as are the discs.

Not your crappy siezed ebay jobbies, the car had done 59k. When i replaced the discs and pads a few months back they were stripped down, thoroughly cleaned and greased, i only use OE parts and the Motorcraft ones are way better than EBC/Mintex IMO, the discs show no signs of scoring, no overheating or warping (indicated by a blue tinge), i would have very high confidence in using them on another car with no problems.

I've looked on ebay and seen single calipers on their own and not even half as good condition for between £20-40.

These are a bolt on fit to a Mk2 Mondeo, the calipers can also be used on a Fiesta ST with ST170 discs (4 stud)

Collection only from Norwich, however i will deliver for you at a small fee (about £10) if you live in most parts of East Anglia, into NW Kent and Surrey.

£75.

If you were logged in, you wouldn't be seeing this ad!
Register your free account today, or log in if you already have an account.

flxsource · 26-07-2011, 06:19 AM

Hi there,

Forgive me if I've missed something, but you don't mention if they're for the front or rear. If they're for the front, then I'm VERY interested. Can I contact you to discuss them?

Yours

Adam

scholesyy · 26-07-2011, 05:56 PM

Where abouts are u mate?
Think u made a typo as im sure u meant they are for a mk3 not mk2?!

flxsource · 26-07-2011, 08:27 PM

I'm in Somerset, but my old man lives in Bungay. I meant that you said you had a pair of brakes, but didn't say if they're for the front or back. Got an ST220 myself, so presumed they were for mk3.

flxsource · 27-07-2011, 08:16 PM

just noticed that you're not the original poster - makes a lot more sense now! Amazing how much info you miss trying to read stuff on your phone...

Tomfezza · 02-10-2011, 07:18 PM

hi there, are these 300mm discs ? are these from a mk3 as looking to fit to my mk5 zs just wanting to ask as all i would need to is to drill out a few holes a couple mm bigger

would you do £80 posted ?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

26-07-2011, 06:19 AM	#2
flxsource Virgin Garage is empty, add now Trader Score: (0) Join Date: Jul 2011 Location: Somerset Posts: 3 Rep Power: 0	Hi there, Forgive me if I've missed something, but you don't mention if they're for the front or rear. If they're for the front, then I'm VERY interested. Can I contact you to discuss them? Yours Adam

26-07-2011, 05:56 PM	#3
scholesyy PassionFord Regular Garage is empty, add now Trader Score: (0) Join Date: May 2009 Location: Weston Super Mare Posts: 441 Rep Power: 4	Where abouts are u mate? Think u made a typo as im sure u meant they are for a mk3 not mk2?!

26-07-2011, 08:27 PM	#4
flxsource Virgin Garage is empty, add now Trader Score: (0) Join Date: Jul 2011 Location: Somerset Posts: 3 Rep Power: 0	I'm in Somerset, but my old man lives in Bungay. I meant that you said you had a pair of brakes, but didn't say if they're for the front or back. Got an ST220 myself, so presumed they were for mk3.

27-07-2011, 08:16 PM	#5
flxsource Virgin Garage is empty, add now Trader Score: (0) Join Date: Jul 2011 Location: Somerset Posts: 3 Rep Power: 0	just noticed that you're not the original poster - makes a lot more sense now! Amazing how much info you miss trying to read stuff on your phone...

02-10-2011, 07:18 PM	#6
Tomfezza Virgin Garage is empty, add now Trader Score: (0) Join Date: Feb 2011 Posts: 3 Rep Power: 0	hi there, are these 300mm discs ? are these from a mk3 as looking to fit to my mk5 zs just wanting to ask as all i would need to is to drill out a few holes a couple mm bigger would you do £80 posted ?

02-10-2011, 07:18 PM
PassionFord Ford Focus Paid Advertisement