jason3249

Hi people got another thing i would like to do

What will i need to run coil packs

Iv got cosworth management

Running efi

But got the old distributor wont to replace it with packs

Anyone know whats needed for the conversion

Or is there a kit out there

Thanks all

Rob_DOHC

iTrader: (4)

Speak to MSD about their wasted spark conversion. This will let use use a zetec coil pack. Individual coil packs is a pretty involved conversion on the RST and you would need to make up a suitable mounting bracket remembering that the exhaust manifold is 1 inch away.

Zetec coil pack is the sensible way forwards..... what do you hope to gain from the conversion?

Rob,

Versus_Creations

iTrader: (1)

its easy.

1. fit a cam sensor kit to the end of the cam pulley

2. extra ignition amp and sub loom. (buy one with rev counter fix built in. only one type i know will have)
that)

3. wasted spark board wired into the ecu.

4. the coilpack and bracket leads etc to be fitted.

gap the plugs correctly and enjoy the extra power with correct mapping.

jason3249

Thanks for that info spoke to them and thay sell the kit for 370 i think thay Said

Got a cam sensor as got cosworth management and a crank sensor to

Wont to go that way as more reliable in my opinion

Rob_DOHC

iTrader: (4)

Fair point, I have fitted a few of the MSD kits and was always impressed with instructions and quality of wiring. Its an easy install.

Rob,

Rob_DOHC

iTrader: (4)

The extra power bit is mostly tosh btw.

Chas

Was that fitted for Ł370?

Rob_DOHC

iTrader: (4)

I wouldn't have thought so, I think that price is probably for an extra ignition amp, the ecu wasted spark board and the wiring loom.