rollerrogers

is there a link to a thread with all the differences to spot when looking for a s1

155lee

iTrader: (10)

Long gutter rails,s1 has 2 piece inlet manifold,the holes for the control modules are stamped into the bulkhead,not drilled.

Chas

Pretty much.

Alot of S1s are running on S2s engines now TBH. TBH I am surprised mine is running an S1 manifold with the ZVH conversion, although being polished it is probably now worthless! Smaller crank pulley, earlier Lucas alternator, Separate tie bar link to the front lower arms can all be added to the list.

rollerrogers

Does anyone have a s1 to hand? That they could measure the length of gutter

james kiely

iTrader: (5)

The gutter rail extends around to the back of the roof on the s1 the earlier she'll stops short of the back of the roof

rollerrogers

right here's another question it is a non custom should it state this on the v5? also did the non custom have the longer gutter even tho I didn't have rear opening windows

Chas

Don't quote me on this (I am probably wrong!) but I understand that the Customs came with a Sunroof and electric windows. AFAIK all RSTs came with longer gutters since they were built in Cologne.

155lee

iTrader: (10)

There's thread upon thread about the differences on the s1 forum.
No s1 should have short gutter rails,all rs1600is have short gutter rails,no argument.
Think the change from short to long was between end of production of the rs1600i in 1984 and the start of s1 production in late 84/85.
Nobody can exactly say why they were changed as rs1600is sometimes had opening 1/4s as an option but still had short rails.
Easiest way to spot a reshelled/fingered rs1600i/s1 is the rails.