When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anyone got a pic of the position of the shifter mounted in either the mk3 or mk4 please? I want to paint the underside of the car but don't want to do it until I've welded a plate with threaded inserts over the original hole! I've got the shifter but not the cables yet so can't see the correct position.
Thanks
I hope these help mate, the way I did it was I sat the gear selector in place then fixed centre console into its original holes, positioned selector to where I wanted it to sit, removed console and drilled n fixed selector into place.
Yes u can keep the centre console, only a small part needs cut out near the front of selector surround, can see it in my first pic and once gators on its hardly noticeable
No not in standard form no but slightly modified because of the lift up reverse yes! Nothing is a straight forward fit, mtx wasn't made for these cars, need to roll the sleves up n make it fit fella. 👍
Yes u can keep the centre console, only a small part needs cut out near the front of selector surround, can see it in my first pic and once gators on its hardly noticeable
Sorry mate not got any pics of it all together yet, car has been a bare shell rebuild and interior will be last to go in should have it complete in the next couple of months.