When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Trying that, no one wants to post and post is to dear etc. I've a old erst tank, I could use the pump feed from that tank and weld it to my tank and rub s2 pump. Obviously not when it's fitted to the car tho
That's what I'll do. Just wasn't sure as my car has a mechanical fuel pump on the block would a pump fit in the my tank. I'll only have the sender unit in there
hmm i thought that it would of been a electronic pump, if it is a mechanical pump then you will have to change the tank as your tank wont have a swirl pot+ the sender will be different and you will also have to have a fuel pump relay wired in.
I have a erst tank and pump here, I tried it up earlier, the bolt fixings on the side look to line up so all I have to do it get the tank strap to fit then mount the pump.
Or
If I cut the pump feed pipe off the erst tank and weld it onto the standard tank then mount the pump.
I've a s2 mfi loom and that will have the fuel pump relay on it