BillyBrown

I am in the process of changing the drivers side track control arm on my series 2...

Struggling getting the anti roll bar but off, is it a reverse thread?

It's covered in wd40 but won't budge... Any help appreciated 👍

haz87

One side is indeed a reverse thread. Can't remember which off hand tho

GVK.

Should be able to tell by the thread of the ARB that you can see poking out past the nut if it's a left-hand thread.

Or try turning it the other way..

BillyBrown

What an absolute nightmare of a job! Yeah it was left hand thread... took a while but I got there

cheers

simonmcf

iTrader: (1)

I soaked the be-jasus out of it in penetrating fluid! Was still lot more effort then it looks

s1cab

iTrader: (1)

Had this problem years back I'm sure from memory the drivers side is the left handed thread