clock cluster Multiplug??
#1
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (2)
Join Date: May 2007
Location: Under the Car as usual!!!
Posts: 1,047
Likes: 0
Received 0 Likes
on
0 Posts
clock cluster Multiplug??
Hi
Has any one got a wiring diagram for the multi plug in the back of the dash clocks.
Need to know what each wire does??
Thanks in advance
Dave
Has any one got a wiring diagram for the multi plug in the back of the dash clocks.
Need to know what each wire does??
Thanks in advance
Dave
#3
Almost there!
iTrader: (4)
Join Date: Jun 2003
Location: Gatwick (ish)
Posts: 7,434
Likes: 0
Received 0 Likes
on
0 Posts
Dave, is this for wiring in a stack, or something similar?
id say speak to Rainbird, as his electrical guru (Ben) knows most of whats what for wiring them in - HTH's
id say speak to Rainbird, as his electrical guru (Ben) knows most of whats what for wiring them in - HTH's
Last edited by Kelv; 31-08-2008 at 03:03 PM.
#4
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (2)
Join Date: May 2007
Location: Under the Car as usual!!!
Posts: 1,047
Likes: 0
Received 0 Likes
on
0 Posts
Cheers Kelv
Someone has posted the answer for me now ta.
Another question though.
Does the rev Tacho wire come from the ecu or direct from the coil??
Someone has posted the answer for me now ta.
Another question though.
Does the rev Tacho wire come from the ecu or direct from the coil??
#5
Almost there!
iTrader: (4)
Join Date: Jun 2003
Location: Gatwick (ish)
Posts: 7,434
Likes: 0
Received 0 Likes
on
0 Posts
was it for wiring in a new dash unit?
if so, could you forward the details to me aswell please, got towire my stack in soon
as for the rev counter - i cant answer as i have no idea
#6
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (2)
Join Date: May 2007
Location: Under the Car as usual!!!
Posts: 1,047
Likes: 0
Received 0 Likes
on
0 Posts
Here you go dude.
Kelv, can I come round and pick up the seat pads soon if you have finished with them??
pin 1 = BN/GN = Oil pressure switch. (Low oil press light)
pin 2 = BU = Batt (charge) light
pin 3 = BN/WH = Coolant temp gauge
pin 4 = BN/BK = Fuel level
pin 5 = BN = Earth
pin 6 = BK/YE = Main pos +
pin 7 = BN/RD = ABS light.
pin 8 = BN/YE = Hand brake light/Brake fluid level.
pin 9 = BN/WH = Airbag
pin 10 = GN = Rev counter
pin 11 = BN = Earth
pin 12 = BU/WH = Main Beam +
pin 13 = GY/YE = Instrument illum +
pin 14 = BK/GN = indicators
pin 15 = BK/WH = indicators
Kelv, can I come round and pick up the seat pads soon if you have finished with them??
pin 1 = BN/GN = Oil pressure switch. (Low oil press light)
pin 2 = BU = Batt (charge) light
pin 3 = BN/WH = Coolant temp gauge
pin 4 = BN/BK = Fuel level
pin 5 = BN = Earth
pin 6 = BK/YE = Main pos +
pin 7 = BN/RD = ABS light.
pin 8 = BN/YE = Hand brake light/Brake fluid level.
pin 9 = BN/WH = Airbag
pin 10 = GN = Rev counter
pin 11 = BN = Earth
pin 12 = BU/WH = Main Beam +
pin 13 = GY/YE = Instrument illum +
pin 14 = BK/GN = indicators
pin 15 = BK/WH = indicators
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM
Mr S1
General Car Related Discussion.
20
27-09-2015 04:06 PM
Dr. Ickxs
Ford Escort RS Turbo
2
15-09-2015 10:15 PM