Dizzyless cam sensor (mounted in cam cover)
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: Jun 2003
Location: West Sussex
Posts: 682
Likes: 0
Received 0 Likes
on
0 Posts
Dizzyless cam sensor (mounted in cam cover)
Anyone tell me the Ford part number for these? I was under the impression they are a Zetec Cam Sensor?
Thanks,
Mark
Thanks,
Mark
#5
Too many posts.. I need a life!!
Join Date: Apr 2006
Location: Garage
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
#6
Too many posts.. I need a life!!
If you want to go distributor-less on a BT Escort Cosworth you can use the ST cam sensor (it fits where the distributor goes) and save yourself the hassle of modifying the cam cover.
#7
PassionFord Post Whore!!
iTrader: (1)
Join Date: Aug 2003
Location: Hampshire
Posts: 3,834
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sailorbob
If you want to go distributor-less on a BT Escort Cosworth you can use the ST cam sensor (it fits where the distributor goes) and save yourself the hassle of modifying the cam cover.
How have you wired it mate?? As I thought it was hall effect and worked differently??
Trending Topics
#8
Too many posts.. I need a life!!
Join Date: May 2005
Location: Jülich / Germany
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MaxCos
have a look on here:
https://passionford.com/forum/viewtopic.php?t=194126
https://passionford.com/forum/viewtopic.php?t=194126
Click here to select a group to join. You will need to pay a subscription fee.
#9
Advanced PassionFord User
Having converted to coilpacks i decided to completely remove the dizzy. Removing the dizzy meant moving the phase sensor to the cam cover Grp A style. The removal of the dizzy required an oil pump drive as well.
Firstly i made an oil pump drive by cutting the dizzy in half and machining the shaft to take a bearing
Then made a housing to fit in the block
Then pressed the two bits together
To give
And finally fitted to the engine
To fit the phase sensor in the cam cover you need to machine the cover to take the sensor holder
I then got the sensor, holder and phase sensor trigger. Available from Mountune or Zoo.
The sensor and holder fitted to cam cover
The cam requires machining to take the trigger
Thanks to Martin@Reyland for that bit of machining
The trigger then bolts into the end of the cam
From B9KOS's tech essay....
Firstly i made an oil pump drive by cutting the dizzy in half and machining the shaft to take a bearing
Then made a housing to fit in the block
Then pressed the two bits together
To give
And finally fitted to the engine
To fit the phase sensor in the cam cover you need to machine the cover to take the sensor holder
I then got the sensor, holder and phase sensor trigger. Available from Mountune or Zoo.
The sensor and holder fitted to cam cover
The cam requires machining to take the trigger
Thanks to Martin@Reyland for that bit of machining
The trigger then bolts into the end of the cam
From B9KOS's tech essay....
Thread
Thread Starter
Forum
Replies
Last Post
Dr. Ickxs
Ford Escort RS Turbo
2
15-09-2015 10:15 PM
rog
General Car Related Discussion.
5
04-09-2015 07:24 AM