my escort cosworth WRC "GOLDIELOCKS"*car finished.new update pics on page 10
#44
I've found that life I needed.. It's HERE!!
Thread Starter
i got the hubs together with the wheels.
but i do not know that much about them
i had a request on making up a set for some english dude one here.
but i will not take them of until after the season.then i probably will take the car of the road..and do some work on it.then i can try and make som drawings..and a price on a remake...
cheers dude
but i do not know that much about them
i had a request on making up a set for some english dude one here.
but i will not take them of until after the season.then i probably will take the car of the road..and do some work on it.then i can try and make som drawings..and a price on a remake...
cheers dude
#45
A friend of mine builds chassis's for GT40 replicas. He uses I think either 5 stud Granada hubs with centre lock adapters or makes them from scratch. If there is a demand I could ask what the costs might be.
He also owns a 7000 mile Escort Cos amongst his other toys.
He also owns a 7000 mile Escort Cos amongst his other toys.
#47
Too many posts.. I need a life!!
Join Date: Jul 2003
Location: Tearing up the tarmac.....somewhere!
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
Very cool. wanted to do this with the 19 inch version of mine. Designed the hubs but could never find the OZ rims
Good work and a pat on the back!
Good work and a pat on the back!
#49
yer, i really need a set of hubs or adaptors.
i have a set of 16" bbs centerlock for my mk2 escort Zakspeed cosworth, but no hubs!!
do you have any dimensions for them or can you get any??
thanks
i have a set of 16" bbs centerlock for my mk2 escort Zakspeed cosworth, but no hubs!!
do you have any dimensions for them or can you get any??
thanks
#52
I've found that life I needed.. It's HERE!!
Thread Starter
i do not know the size of the center on mine yet.will find out..as i can go and get even more centerlock wheels.
#55
I've found that life I needed.. It's HERE!!
Thread Starter
Originally Posted by Panza
Tror ikke jeg har sett en Cossie-eier med sĺpass til skjegg fřr. Stil
takk takk
#56
I've found that life I needed.. It's HERE!!
Thread Starter
here is the prosess of the front end tidy up ive been busy with.
the reason for the tidy up was a massive exhaust and oil leak..so i cleaned it all up..and did some improvements here and there while i was at it.
its alot of pictures..from start to finish..i think.heh..so you can see all that i have done to the car.hope you enjoy it.was abit unsure if id post the pics from when i started the work..cause it looked fookin horendous.hehe..but its all good now
cheers
the reason for the tidy up was a massive exhaust and oil leak..so i cleaned it all up..and did some improvements here and there while i was at it.
its alot of pictures..from start to finish..i think.heh..so you can see all that i have done to the car.hope you enjoy it.was abit unsure if id post the pics from when i started the work..cause it looked fookin horendous.hehe..but its all good now
cheers
#64
I've found that life I needed.. It's HERE!!
Thread Starter
a couple of leftover pics..
will get some new pics of the car out on the road soon.not just boring garage pics.
enjoy
will get some new pics of the car out on the road soon.not just boring garage pics.
enjoy
#68
Too many posts.. I need a life!!
Join Date: May 2005
Location: Jülich / Germany
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
VERY VERY NICE
Any Specs for us?
isn t it a hand braking job to get the inlet out when engine is installed?
thinking to get mine out also.
Any Specs for us?
isn t it a hand braking job to get the inlet out when engine is installed?
thinking to get mine out also.
#69
I've found that life I needed.. It's HERE!!
Thread Starter
the specs are 2.0 litre low comp..haltech computer managment,turbonetics ball bearing turbo,wrc inlet manifold,bilstein coilovers,and some other stuff aswell
getting the inlet manifold out when the engine is still in , is not that bad,,as long as you remove the distributor or dizziless cap ,then you get to the bolts on the underside of the manifold pretty easy...abit narrow yeah..but no problem.ive been fixing cars that has got far less space to get your hands around.
getting the inlet manifold out when the engine is still in , is not that bad,,as long as you remove the distributor or dizziless cap ,then you get to the bolts on the underside of the manifold pretty easy...abit narrow yeah..but no problem.ive been fixing cars that has got far less space to get your hands around.
#71
I've found that life I needed.. It's HERE!!
Thread Starter
here are some new pictures.was out driving in the nice sunny weather.and took quite a few pics.many boring ones..from the same angle and stuff..but at least you can check it out.
there is a fuck you pic in the middle!!just me trying to be friendly!!hehe
enjoy and cheers
there is a fuck you pic in the middle!!just me trying to be friendly!!hehe
enjoy and cheers
#77
I've found that life I needed.. It's HERE!!
Thread Starter
hey people.
just wanted to add some new...but same style pics.youve seen the car a thousand times now..so...but here they are anyways.heh.
enjoy people.
just wanted to add some new...but same style pics.youve seen the car a thousand times now..so...but here they are anyways.heh.
enjoy people.