Injectors Duty cycle (FAO STU)
03-12-2006, 06:41 PM
#1
PassionFord Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2005
Location: France
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
Injectors Duty cycle (FAO STU)
I've just fitted a new stage 3 MSD chip (on shelf type) and after setting the boost I took the injetors duty cycle and I mesured 100% @ full load around 1.6bar with about 35° of ACT is that normal?
I though I shouldn't go that high??
I though I shouldn't go that high??
03-12-2006, 09:40 PM
#2
Too many posts.. I need a life!!
You should not go over 80%.
Dependng on injector positioning, current size and how they fire, fitting larger injectors may not be the best opttion either.
Dependng on injector positioning, current size and how they fire, fitting larger injectors may not be the best opttion either.
04-12-2006, 10:47 AM
#3
PassionFord Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2005
Location: France
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
well the point is that injectors are match with the chip and I've nothing more than what's required in the setup.. that's why I'm asking the one who did the map...
Thread
Thread Starter
Forum
Replies
Last Post
mk3ste
Restorations, Rebuilds & Projects.
19
17-10-2021 10:09 AM
DixieTheKid
Ford Sierra/Sapphire/RS500 Cosworth
11
06-06-2020 11:20 AM
