2wd saph for sale (Staffi old car)
#42
20K+ Super Poster.
iTrader: (1)
IMO and I have said this to Dean, it needs finishing off, not many people buy none runners, that's the simple fact of it.
Tbh I think he's crazy selling after what he's done, I thought I was the barmy one
Tbh I think he's crazy selling after what he's done, I thought I was the barmy one
The following users liked this post:
Rst tyrone (05-08-2015)
#43
Made a good offer without the wheels but no go Really wanted it too been trying for ages now and missed out on 4 nice spec cars its really hard work
#44
Advanced PassionFord User
Stunning car, only a matter of time before its snatched up, id be interested in the wheels if they were to come off for a sale, best of luck with sale mate.
The following users liked this post:
Rst tyrone (05-08-2015)
#46
I've found that life I needed.. It's HERE!!
i would buy the sensors and rear brakes and finish it off for the sale. stunning car and would be far more appealing finished. only 500ish needed spending on bits then you might get your asking price. not a dig at all, its a cracking car.
The following users liked this post:
Staffi (06-08-2015)
The following users liked this post:
Staffi (06-08-2015)
#48
£14k without the wheels mate a few weeks now so Mines in the paint shop and engine on way back from builders but I'm only doing it standard not what I want really so will proberbly build it back up and sell and wait for one to come up I know how you feel about spending time on them starting to have enough now if I don't find one I'm going for the new focus uck it lol
#49
PassionFord Post Whore!!
iTrader: (23)
I spoke to you when the car went for sale i spoke to my mate and he was really interested but really needed a complete car to test for the money - i know it's a belting car and wouldn't bother me doing the few little jobs but it's not me buying, needs completing
The following users liked this post:
Staffi (06-08-2015)
#50
I'm Finding My Feet Here Now
always feels suspect when a car advertised as this good isnt finished as its top end money you are advertising it for.
if you had offer without wheels for 14k,sell the wheels and put 500 quid into the car to make 14k.... i just dont get it... you wont get 14k for it in bits so wy not get somebody else to finish it then sell it...... if you dont have the time to finish it.?
if you had offer without wheels for 14k,sell the wheels and put 500 quid into the car to make 14k.... i just dont get it... you wont get 14k for it in bits so wy not get somebody else to finish it then sell it...... if you dont have the time to finish it.?
#51
always feels suspect when a car advertised as this good isnt finished as its top end money you are advertising it for.
if you had offer without wheels for 14k,sell the wheels and put 500 quid into the car to make 14k.... i just dont get it... you wont get 14k for it in bits so wy not get somebody else to finish it then sell it...... if you dont have the time to finish it.?
if you had offer without wheels for 14k,sell the wheels and put 500 quid into the car to make 14k.... i just dont get it... you wont get 14k for it in bits so wy not get somebody else to finish it then sell it...... if you dont have the time to finish it.?
As for price I think it's fair considering the money I've spent on it and considering mileage condition etc if it don't sell it will just sit in the garage until I have time to finish it
If there was somthing suspect about the car I would of accepted one of the offers I've had to get rid of the car but this is not the case there's nothing at all wrong with it as for price it clearly shows you haven't got a clue and are talking out off your ar*e so thanks for the stupid comment on my sale thread
#52
20K+ Super Poster.
iTrader: (1)
There is nothing suspect with this car, you'll struggle to find better believe me, of course there are a few gems out there but IMO this car is stunning, but I will reiterate as Dean knows I think ( personally) it needs finishing off.
Dean has been very honest mentioning the scratch and the dents, he is a genuine decent guy to deal with, my sale was hassle free.
Dean has been very honest mentioning the scratch and the dents, he is a genuine decent guy to deal with, my sale was hassle free.
The following users liked this post:
Rst tyrone (08-08-2015)
The following users liked this post:
Rst tyrone (11-08-2015)
The following users liked this post:
Rst tyrone (12-08-2015)
The following users liked this post:
Rst tyrone (13-08-2015)
The following users liked this post:
Staffi (13-08-2015)
#64
PassionFord Post Whore!!
iTrader: (10)
Good to know,I have not started a rebuild/project thread as I have not had time but I have pulled the car apart and started a amassing a huge pile of parts for the rebuild.
Plans are.
Paint the underside again.
Re-powder coat all the suspension parts satin black.
Replace every bolt/nut/washer with nos genuine ford.
Reyland 300mm rear discs.
Dropped off a pile of parts at the platers to get zinc plated.
I have new fuel pipes,gators,wing repeaters, plus a ton of other parts coming from ford.
Re bolstered the drivers seat.
New compomotive 18" th wheels with Yokohama parada tyres.
Had the front caliper brackets machined as they were fouling the disc.
Booked in for the drivers side to be painted and the holes for the strut brace to be welded up and painted.
New track control arms,refit the front arb,poly bush the rear beam and front suspension.
Bought konis and waiting on Ahmed abayjoo springs.
Fitted an rs center to the steering wheel.
Sent the rear calipers to be plated silver and be rebuilt.
New under bonnet sticker kit.
So far I'm at the parts collecting stage and the car is up on axle stands with bits off to be finished the way I want them.
I'm taking pics but not uploaded them.
I will when I get a few hours to sit down and start a thread.
Plans are.
Paint the underside again.
Re-powder coat all the suspension parts satin black.
Replace every bolt/nut/washer with nos genuine ford.
Reyland 300mm rear discs.
Dropped off a pile of parts at the platers to get zinc plated.
I have new fuel pipes,gators,wing repeaters, plus a ton of other parts coming from ford.
Re bolstered the drivers seat.
New compomotive 18" th wheels with Yokohama parada tyres.
Had the front caliper brackets machined as they were fouling the disc.
Booked in for the drivers side to be painted and the holes for the strut brace to be welded up and painted.
New track control arms,refit the front arb,poly bush the rear beam and front suspension.
Bought konis and waiting on Ahmed abayjoo springs.
Fitted an rs center to the steering wheel.
Sent the rear calipers to be plated silver and be rebuilt.
New under bonnet sticker kit.
So far I'm at the parts collecting stage and the car is up on axle stands with bits off to be finished the way I want them.
I'm taking pics but not uploaded them.
I will when I get a few hours to sit down and start a thread.
#66
20K+ Super Poster.
iTrader: (1)
How come you're painting the underside AGAIN?? Aren't you making work for yourself there bud?? Mind you, your car and you know how you want it, it'll be a stonking car that's for sure
#68
PassionFord Post Whore!!
iTrader: (10)
And me paying 15k wasn't madness,that was the price and the car is worth it but for it to be up to my standard and be 100% happy I knew what needed done and spent before I even viewed the car.
Thread
Thread Starter
Forum
Replies
Last Post
rog
Cars for Sale
25
04-09-2015 12:10 PM