Mk2 fiesta rolling shell (mk,s old car )
01-05-2010, 08:14 PM
#1
Mk2 fiesta rolling shell (mk,s old car )
This car needs no introduction ,i bought it off marc a couple of years back and added my engine to it ,had great fun with the car but always wanted a yb powered one ,so this now has to go ,i have sold the engine/manegment and box to a mate,so the rest is up for sale
a couple of pics of the car as i had it
The next pics is how the car now stands and how it will be sold ,in the pics the steering wheel ,harnesses and wheels are not included ,the silver wheels are for sale aswell though.
the car has on it included in the sale ,grs cooler ,full saftey devices cage ,wilwood 4pot brakes ,rear disk conversion ,full rutland suspension which is completly adjustable inc rear end (2k handles out of this world ) twin 044 pumps in bracket ,expensive fuel cell with snap lock quick release fittings (no fuel leaks)will wood pedal box ,wilwood hydrolic clutch cylinder,haywood and scott exhaust (£600)
very solid shell,removable front panel and bonnet on 4 pins.also i have a A4 size folder full of history and receits adding up to well over 20k.
All this needs to make complete ,seats ,engine ,box,managment,battery,harnesses,wheels ,radiator
ideal project for someone with a rotton rs turbo
Price £2500 or £3000 with the silver wheels
located in essex
steve 07917676820
a couple of pics of the car as i had it
The next pics is how the car now stands and how it will be sold ,in the pics the steering wheel ,harnesses and wheels are not included ,the silver wheels are for sale aswell though.
the car has on it included in the sale ,grs cooler ,full saftey devices cage ,wilwood 4pot brakes ,rear disk conversion ,full rutland suspension which is completly adjustable inc rear end (2k handles out of this world ) twin 044 pumps in bracket ,expensive fuel cell with snap lock quick release fittings (no fuel leaks)will wood pedal box ,wilwood hydrolic clutch cylinder,haywood and scott exhaust (£600)
very solid shell,removable front panel and bonnet on 4 pins.also i have a A4 size folder full of history and receits adding up to well over 20k.
All this needs to make complete ,seats ,engine ,box,managment,battery,harnesses,wheels ,radiator
ideal project for someone with a rotton rs turbo
Price £2500 or £3000 with the silver wheels
located in essex
steve 07917676820
Last edited by Steve Cooper; 03-05-2010 at 02:57 PM.
Trending Topics
03-05-2010, 08:44 PM
#9
sad to see it in pieces again thinking about the thousands of hours of blood sweat and tears that i put into that car,
put a half decent engine in this shell and run it on slicks on track and it is near on untouchable, that suspension set up etc cost me a mint, much more than what steve is asking for the whole thing, and that fuel pump and filter holder was over £400 alone!
id like the tank and that in the jwrc lol
good luck with the sale steve
grab a bargain somebody while you have the chance
put a half decent engine in this shell and run it on slicks on track and it is near on untouchable, that suspension set up etc cost me a mint, much more than what steve is asking for the whole thing, and that fuel pump and filter holder was over £400 alone!
id like the tank and that in the jwrc lol
good luck with the sale steve
grab a bargain somebody while you have the chance
04-05-2010, 08:26 AM
#12
sad to see it in pieces again thinking about the thousands of hours of blood sweat and tears that i put into that car,
put a half decent engine in this shell and run it on slicks on track and it is near on untouchable, that suspension set up etc cost me a mint, much more than what steve is asking for the whole thing, and that fuel pump and filter holder was over £400 alone!
id like the tank and that in the jwrc lol
good luck with the sale steve
grab a bargain somebody while you have the chance
put a half decent engine in this shell and run it on slicks on track and it is near on untouchable, that suspension set up etc cost me a mint, much more than what steve is asking for the whole thing, and that fuel pump and filter holder was over £400 alone!
id like the tank and that in the jwrc lol
good luck with the sale steve
grab a bargain somebody while you have the chance
one question for you mark is i have you old inlet and have put a 2wd cosworth throttle bodie on it and it sits realy close to my servo, what would be the best way to pipe it as a 90 degree bend would restrict it wouldnt it.
thanks
05-05-2010, 09:01 AM
#16
05-05-2010, 09:13 AM
#17
im sure you can find the readies ,try your shell on www.seriesoneturbo.co.uk
im on there already but the missus will kill me if she sees i want something else as ive just got a saff rolling shell waiting to be started aswell lol
but this would suit me better as my s1 shell is extremely good and will be abit of a waste when im ripping around a track or giving it death at pod....
its still got all the original wiring ect so just needs a standardish engine to make a lovely car ....
its all painted underneath and its got things like avo coilovers/cossie 2wd 4pots with hispec bells/polybushes/comp th2s brand new with brand ne yokohamas ect ect .... interior is mint and so on
too slow
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM
rog
Cars for Sale
25
04-09-2015 12:10 PM