nobby20

iTrader: (1)

Looking to get rid of these alloys as there taking up too much space in the shed. They are 18" O.Z chronos and have mint tyres.



Looking for 400 quid or sensible offers.

Also have a set of compomotive TH lines in 15 x 8 in a ET25 making them fit like escos wheels only an inch smaller. Come with mint 195/45/15 unfitted as the wheels have just been fully refurbed and powdercoated.



wheels where identical to these but had them powdercoated after laquer started to peel.

Looking for 450 for these.

zvhturbo29rs

iTrader: (7)

are the comps powdercoated in the same colour as the pic??cheers

RichieST

iTrader: (2)

I contacted you a while ago regarding the OZ's, however I never heard back... What tyres are they? Any pics of the tread depth? And what offset are they?

Thanks

nobby20

iTrader: (1)

the ones in the pic are diamond cut. mine were sent back to dubmeister where i got them from and powdercoated silver as the laquer peeled after a month or so. The wheels are now in the boxes still and have never had tyres since been re done. however i have a full set of 195x45x15 tyres to go with them, cheers

nobby20

iTrader: (1)

Sorry mate for not getting back to you. The wheels have nearly new tyres which are 215x35x18. Think the offset is 38? I know at least 2 of the tyres are toyo proxes. not sure of other two however i would say they have 7-8mm tread still.

cheers

maxest

iTrader: (1)

Those comps look superb diamond cut,, take it there silver now and not how the pic shows them??

nobby20

iTrader: (1)

yeah unfortunatly when i sent them back due to laquer peeling they just powdercoated them silver and sent me them back. They were orginally diamond cut however i wasnt given the choice second time round lol

RichieST

iTrader: (2)

Ok mate, I was probably looking for a minimim offset of 40, so if you could double check for me what yours are then that would be good. I was also visiting family up near you for a few days when I contacted you last, but now I am about 250 miles away! So if you could let me know the offset of them then we can go from there.

Cheers
Rich

xr_craig

iTrader: (2)

I might be interested in the OZ's if they'll clear my brakes mate, just gonna do a bit of investingating then i'll let you know.

Are they 8 inch wide?

nobby20

iTrader: (1)

i'll check the offsets tomorrow. im working in amsterdam at the min but come home for the weekend tomorrow. cheers

nobby20

iTrader: (1)

Yeah i think they are 8 inch wide. Will look tomorrow when i get home. cheers

stembo21

iTrader: (1)

you should be working steve not on here lol. give me them wheels and your fiesta for my bmw?

big ord

alrite mate afterthe oz crono is there any marks or flat spots on the wheels and do they have all the plastic caps for the nuts what is your bottom price as i can collect at week end
cheers

big ord

alrite do u definately have the plastic caps there should have 4 round ones for the stud not in use and 4 for the nut for each wheel if u have i will come at weekend and what make ov tyres are on and are there all the same make will you pm me your number
cheers phil

big ord

you have a pm

cossiegreg1

Big Ord

your car will look proper good if you get them mate . just got back from hol last night.

big ord

got them but fance something diffrent so for sale again mate if you know anybody??

cossiegreg1

captainrs500 was askin before. i know he's been changing wheels like changing socks recently

cossiegreg1

did they have the caps?

m1xsy

I used to sell these wheels at work and should be ET38 offset if this helps anyone? The wheels are also 7" wide in 4 stud fitment and only 8" wide in 5 stud. I do have some blanking plugs and black plastic covers for the nuts if this also helps.

cossiegreg1

i got 4 stud on my car and they deffo 8 inch?

RichieST

iTrader: (2)

Where abouts in the world are you mate?

m1xsy

The width and size is always stamped in the back of all Oz alloys. If you have measured the width you may have got 8" but infact it is 7"
If you also measure the actual wheel size it will measure 19" when infact the wheel is only 18"...The reason for this is that a wheel measurement is taken from where the tyre fits on the beads. If your wheels are 8" wide it will be stamped 8x18. You may be right and I maybe wrong?

cossiegreg1

they defo 8x18 mate, how much do you want for the caps? could do with a few spares

cossiegreg1

rich He's in durham

big ord

i am in durham the wheels are on ebay i want 400 for them if intrested let me know
cheers phil

big ord

there are 7x18 greg mate

cossie rich

do you still have these?

big ord

you have pm

rsmark86

iTrader: (3)

you have pm