Originally Posted by
RS2000CUSTOM
I have rebuilt many Atlas and English axles for customers
Without the correct tool it is total guess work to set the pre-load on the pinion nut and NOT reccomended
As for the backlash and which shims are required this must only be done after the pinion pre-load is correct
Here is an English for my own car - different to Atlas but same equipment to set-up the diff
Dam this is a piece of work! one question you said pre load as to be done even before setting washers and other does this means we have to replace each time de pressure washer?
Thanks for this thread
Last edited by escort_sport; 27-03-2013 at 02:34 PM.