Just spent a while at the car lads, fitted rear drop link, and started checking everything top to bottom on engine, dipped it for oil and was too much do drained that off and renewed oil and filter with ford parts, I wanted to drop the sump but time wasn't on my side today so I'll do it along with another oil change in a few weeks, I noticed that the inside of the airbox was wet with oil so removed it and replaced filter, cleaned out the maf with electrical cleaner and blew dry with airline, I then saw the steel pipe was a bit wet aswell so cleaned it up to find a crack! I used a bit of steel putty and sealed it up again, cleaned the map sensor and fired it up, seems to have improved the smoke issue need to drive it another bit to see if hesition is gone aswell! Is there any easy way of removing the breather pipe to stop oil getting back on the maf as it will only lead to further issues again