1.6cvh NMS Red s2 project..Fitting a T34 and raising the boost to 27psi.
Hi all, as some of you know im having my engine built at norris motorsport, the engine will be ready next week so im starting to strip my engine down and getting it ready to be removed to fit the new one, couple of pictures of before etc and where i am now, then ill upload them as the new engine goes in and the mapping/work is done on the car.
The engine spec will be:
NMS bottom end
Cosworth mahle pistons 0.75 oversize.
Robson engineering EN24T H section con-rods custom made to NMS specification, shot peened and fitted with ARP big end bolts.
Original sump blasted, cleaned and painted in 2 pac black paint.
New modified oil pump, for high flow and high pressure.
NMS head work to flow up to 280bhp (For now)
Newmans phase 4 fast road cam, solid lifters and single valve springs.
2.5" exhaust with 4" tip
FMIC twin fans
T34 turbo
Group A k&n
Omex 600 managment, will have the anti lag and launch control on after running in.
Mk1 focus rs injectors.
ST170 300mm brake conversion, grooved disks and yellow stuff pads.
Thats about it for performance parts, all i can do it wait until i get the car up to Karl and Oli and let them work there magic on it!
Pictures to follow..
Last edited by Joe91; 08-02-2012 at 05:46 PM.