Originally Posted by
taz1787
ok get both coded keys ( a and b )
insert key A to pos 2 wait 1 sec remove
insert key B (within 5 secs) to pos 2 wait 1 sec remove
wait 10 secs
insert new key to pos 2 wait 4 secs
switch off ( do not remove) wait 5 secs
start engine
if engine does not start and clock led flashes
switch ign on wait at least 20 secs
switch off repeat programming procedure
hope this helps
Thanks for that Taz, tried that but still failed. I think the key may be faulty