Focas Nearside Driveshaft.
Hello. Could I have some Information regarding on a Focas Nearside Driveshaft removal. I got the Hub off the car, now I need to remove the driveshaft from the gearbox. on the New replacement, I see there's a round clip that retains the shaft to the Box. Now I've read the haynes manual and it's says in the, use a sliding hammer or a lever. Well I have'nt got a sliding Hammer so i used a Crow bar. it's seems it the shaft is not sliding out from the box,so I used a Copper mallet, but no joy there.
Could anybody give me other ways to remove the shaft form the box end.
All Information would be gratefully received.
Thankyou. Andy