PassionFord - View Single Post

Brettski mk2 · 20-03-2010, 03:34 PM

Hi all I have fitted the grp A chassis engine mounts and in doing so have made a new problem.the new engine mounts foul the bit where the oil filter is screwed on to "the alloy part" So I will use a remote oil filter housing and move it on to the inner wing

Can I get rid of the stainless steel oil cooler/oil warmer thing with the two coolant hoses on one goes to the head and one to the heaters,I am not using a heater in the car as its a race car
What can I do with the hose that comes out of the head?blank it off or pipe it somewhere else?
cheers

20-03-2010, 03:34 PM	#1
Brettski mk2 Too many posts.. I need a life!! Garage is empty, add now Trader Score: (3) Join Date: Nov 2009 Location: suffolk Posts: 536 Rep Power: 3	bit of help needed Hi all I have fitted the grp A chassis engine mounts and in doing so have made a new problem.the new engine mounts foul the bit where the oil filter is screwed on to "the alloy part" So I will use a remote oil filter housing and move it on to the inner wing Can I get rid of the stainless steel oil cooler/oil warmer thing with the two coolant hoses on one goes to the head and one to the heaters,I am not using a heater in the car as its a race car What can I do with the hose that comes out of the head?blank it off or pipe it somewhere else? cheers Last edited by Brettski mk2; 20-03-2010 at 03:35 PM.