PassionFord - View Single Post

scoooby slayer · 19-11-2008, 10:21 PM

thought id post my project in here. putting a 3.6 td marine vm engine in my e30. used gearbox from bmw custom fit to vm bellhousing. converted from auto to manual box. car and engine i had anyway. proper budget build spent £100 so far on machining and a manual fuel pressure reg.

fitted bmw flywheel where torque converter was.

fitted getrag box to original vm bellhousing with adapter plates.

had to move sump pan as it fouled on crossmember.

engine mounts for new engine below.

relocated pick up pipe for altered sump.

19-11-2008, 10:21 PM	#1
scoooby slayer PassionFord Post Whore!! 1999 Toyota Supra Trader Score: (4) Join Date: Jun 2006 Location: st neots cambridgeshire Posts: 4,747 Rep Power: 10	bmw e30 3.6 td project thought id post my project in here. putting a 3.6 td marine vm engine in my e30. used gearbox from bmw custom fit to vm bellhousing. converted from auto to manual box. car and engine i had anyway. proper budget build spent £100 so far on machining and a manual fuel pressure reg. fitted bmw flywheel where torque converter was. fitted getrag box to original vm bellhousing with adapter plates. had to move sump pan as it fouled on crossmember. engine mounts for new engine below. relocated pick up pipe for altered sump. __________________ widebody doluck mkiv supra, 900 hp on a t51r spl bb 134 mph in the 1/4 mile so far new project im building a dragster for pod http://passionford.com/forum/restora...r-is-born.html Last edited by scoooby slayer; 19-11-2008 at 10:40 PM.