Having converted to coilpacks i decided to completely remove the dizzy. Removing the dizzy meant moving the phase sensor to the cam cover Grp A style. The removal of the dizzy required an oil pump drive as well.
Firstly i made an oil pump drive by cutting the dizzy in half and machining the shaft to take a bearing
Then made a housing to fit in the block
Then pressed the two bits together
To give
And finally fitted to the engine
To fit the phase sensor in the cam cover you need to machine the cover to take the sensor holder
I then got the sensor, holder and phase sensor trigger. Available from Mountune or Zoo.
The sensor and holder fitted to cam cover
The cam requires machining to take the trigger
Thanks to Martin@Reyland for that bit of machining
The trigger then bolts into the end of the cam
From B9KOS's tech essay....