had me mate round today with his saph tried his 3 bar map sensor still wouldnt run then tried his ignition amp still didnt go so then cheaked the timing and found the dizzy and bottom pulley didnt line up to where they should be. cams line up spot on it looks to be about 2 teath out on both pulleys wich is very strange cus now and then it will run perfect no knocking or anything will remove bottom pulley 2moro and get it all lined up then see what happens dizzy bearing in sharft feels a bit dodgy with a fair bit of wear in it. god nows why they are out of line new belt tensioner the lot belt is not slack at all.
laters chaps thanks
let u now what happens al